2013-2015 Land Cruiser Prado · Service Manual Brake

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT MULTI-TERRAIN SELECT SWITCH

  1. C291792E01
    C281308E02
    Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    MUD & SAND
    *b
    LOOSE ROCK
    *c
    MOGUL
    *d
    ROCK & DIRT
    *e
    ROCK

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    17 (ECU) - 24 (E)
    MUD & SAND
    Below 1 Ω
    18 (UP) - 24 (E)
    19 (DN) - 24 (E)
    10 kΩ or higher
    17 (ECU) - 24 (E)
    LOOSE ROCK
    Below 1 Ω
    18 (UP) - 24 (E)
    10 kΩ or higher
    19 (DN) - 24 (E)
    17 (ECU) - 24 (E)
    MOGUL
    10 kΩ or higher
    18 (UP) - 24 (E)
    19 (DN) - 24 (E)
    17 (ECU) - 24 (E)
    ROCK & DIRT
    10 kΩ or higher
    18 (UP) - 24 (E)
    19 (DN) - 24 (E)
    Below 1 Ω
    17 (ECU) - 24 (E)
    ROCK
    10 kΩ or higher
    18 (UP) - 24 (E)
    Below 1 Ω
    19 (DN) - 24 (E)
    20 (FRE) - 24 (E)
    ON/OFF: Pressed
    Below 1 Ω
    ON/OFF: Not pressed
    10 kΩ or higher
    Text in Illustration 
    *a
    Component without harness connected
    (Center Cluster Module Switch (Multi-terrain Select Switch))

    If the result is not as specified, replace the center cluster module switch (multi-terrain select switch).

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →