REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
|
 |
- Detach the 4 clips.
Disconnect the connector and remove the integration control and panel assembly.
| 2.
REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
 |
- Detach the 10 clips and remove the center instrument cluster finish panel assembly.
| 3.
REMOVE RADIO RECEIVER ASSEMBLY |
 |
- Remove the 4 bolts.
Pull the radio receiver assembly to detach the 2 guides on the backside of the radio receiver assembly.
Disconnect each connector and remove the radio receiver assembly.
| 4.
REMOVE NO. 1 RADIO BRACKET |
 |
- Remove the 3 screws and No. 1 radio bracket.
| 5.
REMOVE NO. 2 RADIO BRACKET |
 |
- Remove the 3 screws and No. 2 radio bracket.