Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
INSPECTION PROCEDURE
HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK USAGE CONDITION
Check the conditions under which the Application Link function is being used.
Result
Result
Proceed to
The Application Link function can be operated while the vehicle is stopped
A
The Application Link function cannot be operated while the vehicle is being driven or while the vehicle is stopped
B
HINT:
Some applications have a display restriction in consideration of safe driving.
Check if the "iPhone" or "iPod touch" can be operated when an Application Link compatible application is running and the "iPhone" or "iPod touch" is disconnected from the head unit.
Result
Result
Proceed to
The "iPhone" or "iPod touch" can be operated
A
The "iPhone" or "iPod touch" cannot be operated
B
HINT:
Some applications have a display restriction in consideration of safe driving.
B
RESTART APPLICATION LINK COMPATIBLE APPLICATION
A
3. CHECK APPLICATION RUNNING STATUS
Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the navigation receiver assembly with an Application Link compatible application running.
HINT:
The Application Link function may not start if a compatible application is not running.
If another application is running on the "iPhone" or "iPod touch", the Application Link compatible application is not running.
Result
Result
Proceed to
The "iPhone" or "iPod touch" can be operated
A
The "iPhone" or "iPod touch" cannot be operated
B
HINT:
Some applications have a display restriction in consideration of safe driving.