Cannot Connect to Center
Circuit diagnosis · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
INSPECTION PROCEDURE
- HINT:
- When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
| 1. CHECK SETTINGS |
Check the "iPhone", "iPod touch" or "MirrorLink" compatible smartphone settings.
Result Result
Proceed to
Data communication is enabled, a SIM card is inserted and reception is good
A
Data communication is disabled
B
A SIM card is not inserted (for "iPhone", "MirrorLink" compatible smartphone)
C
Reception is poor or the smartphone is outside the service area
D
|
|
||||
|
|
||||
|
|
||||
| A | |
| 2. CHECK APPLICATION |
Check if a Connected Services compatible application is installed on the connected "iPhone", "iPod touch" or "MirrorLink" compatible smartphone.
- HINT:
- Some applications require payment.
- The names of applications are subject to change.
- Some applications require payment.
Result Result
Proceed to
A Connected Services compatible application is installed
A
A Connected Services compatible application is not installed
B
|
|
||||
| A | |
| 3. CHECK APPLICATION RUNNING STATUS |
Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, and touch "Connected services" on the information screen of the radio and display receiver assembly with a Connected Services compatible application running.
- HINT:
- The Connected Services function may not start if the application is not running.
- The Connected Services function may not start if the application is not running.
- The Connected Services function may not start if the application is not running.
Result Result
Proceed to
The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated
A
The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone cannot be operated
B
|
|
||||
| A | ||
| ||
| 4. CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY |
Replace the No. 1 stereo jack adapter assembly (Click here).
- OK:
- The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated.
Result Result
Proceed to
OK
A
NG (for "MirrorLink" compatible smartphone)
B
NG (for "iPhone", "iPod touch")
C
|
|
||||
|
|
||||
| A | ||
| ||
| 5. CHECK "Bluetooth" CONNECTION |
Check that the head unit and "MirrorLink" compatible smartphone can be connected using "Bluetooth".
Result Result
Proceed to
Can be connected using "Bluetooth"
A
Cannot be connected using "Bluetooth"
B
|
|
||||
| A | |
| 6. CHECK PRODUCT INFORMATION (OPERATION CHECK) |
Contact the on-site operator and register the user (Click here).
- OK:
- The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated.
|
|
||||
| OK | ||
| ||
