Cannot Contact Operator Service or does not Operate Properly
Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
INSPECTION PROCEDURE
HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK USAGE CONDITION
Check for problem symptoms.
Result
Result
Proceed to
A destination cannot be set
A
The current vehicle position cannot be sent
Outgoing calls cannot be made
B
B
GO TO "Bluetooth" COMPATIBLE CELLULAR PHONE CANNOT BE CONNECTED" IN PROBLEM
SYMPTOMS TABLE