52129B
1.REMOVE FRONT BUMPER COVER LOWER
51405A
2.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
3.DRAIN ENGINE COOLANT
17705
4.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE
Detach the 3 clamps and disconnect the intake mass air flow meter connector.
Detach the 4 clamps.
Loosen the hose clamp and remove the air cleaner cap sub-assembly with air cleaner hose.
17861
5.REMOVE INTAKE AIR CONNECTOR
Disconnect the air pressure sensor connector.
Disconnect the vacuum hose from the air pressure sensor.
Detach the wire harness and vacuum hose from the intake air connector.
Disconnect the No. 2 ventilation hose.
Disconnect the vacuum hose.
Loosen the hose clamp.
Remove the 3 bolts and intake air connector.
22030
6.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
Slide the clip and disconnect the water by-pass hose from the throttle body with motor assembly.
Slide the clip and disconnect the No. 2 water by-pass hose from the throttle body with motor assembly.
Disconnect the throttle body with motor connector.
Remove the 4 bolts and throttle body with motor assembly.
Remove the gasket from the intake manifold.