Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260407 ACCELERATOR PEDAL A

2TR-FE ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


PROCEDURE

Hide 78110K 1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for Automatic Transmission)

NOTICE:
·

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.

·

Prevent physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.



a.

Install the accelerator pedal sensor assembly with the 3 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.

Connect the accelerator pedal connector.


Hide 78110K 2.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for Manual Transmission)

NOTICE:
·

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.

·

Prevent physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.



a.

Install the accelerator pedal sensor assembly with the 2 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.

Connect the accelerator pedal connector.


Hide 55606 4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover sub-assembly.


b.

Install the screw to the No. 1 instrument panel under cover sub-assembly.