Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260407 ACCELERATOR PEDAL A

2TR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.
B238138

Remove the screw from the No. 1 instrument panel under cover sub-assembly.


b.

Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.


Hide 78110K 3.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for Automatic Transmission)

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A355811

Disconnect the accelerator pedal connector.


b.

Remove the 3 nuts and accelerator pedal sensor assembly.

NOTICE:
·

Prevent physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.




Hide 78110K 4.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for Manual Transmission)

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A355812

Disconnect the accelerator pedal connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.

NOTICE:
·

Prevent physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.