Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260409 CAMSHAFT POSITION SENSOR A

2TR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301M 1.INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

a.

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

NOTICE:
·

When reusing the camshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.




c.

Connect the camshaft position sensor connector.


Hide 11301M 2.INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

NOTICE:
·

When reusing the camshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.




c.

Connect the camshaft position sensor connector.


Hide 17705 4.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE