Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR
RM27T0E _51 Engine / Hybrid System _053657 1GR-FE ENGINE CONTROL _0260428 CRANKSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 27020 1.REMOVE GENERATOR ASSEMBLY

Hide 88320 2.REMOVE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16630D 4.REMOVE IDLER PULLEY ASSEMBLY (w/o Air Conditioning System)

a.

Remove the 3 bolts and idler pulley.


Hide 11401G 5.REMOVE CRANKSHAFT POSITION SENSOR

a.
A076417

Disconnect the sensor connector.


b.

Remove the bolt and sensor.