Home › Engine / Hybrid System › 5L-E (ENGINE CONTROL) › ACCELERATOR PEDAL
RM27T0E _51 Engine / Hybrid System _053658 5L-E ENGINE CONTROL _0260439 ACCELERATOR PEDAL A

5L-E ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


PROCEDURE

Hide 78110K 1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shocks to the accelerator pedal.

·

Do not disassemble the accelerator pedal assembly.

·

This accelerator pedal does not require lubrication.

·

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.

Install the accelerator pedal sensor with the 2 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.

Connect the accelerator pedal sensor connector.