Home › Engine / Hybrid System › 5L-E (ENGINE CONTROL) › ECD SYSTEM
RM27T0E _51 Engine / Hybrid System _053658 5L-E ENGINE CONTROL _0260445 ECD SYSTEM U

5L-E ENGINE CONTROL  ECD SYSTEM  TERMINALS OF ECM  


U169065E02
1.198,0.604 1.563,0.802 0.365,0.198 10 false C161 2.729,0.604 3.177,0.802 0.448,0.198 10 false C162 4.281,0.604 4.688,0.802 0.406,0.198 10 false G182 5.604,0.615 6,0.813 0.396,0.198 10 false G183

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition". Use the illustration above as a reference for the ECM terminals.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G183-2 (BATT) - C161-5 (E1) L - BR Battery (for measuring the battery voltage and for ECM memory) Always 11 to 14 V
G183-8 (SREL) - C161-5 (E1) R - W-B GLOW relay Cranking 11 to 14 V
G183-8 (SREL) - C161-7 (E01) R - W-B GLOW relay Idling
(engine started and 600 sec. have passed)
0 to 1.5 V
G183-10 (MREL) - C161-5 (E1) V - BR MAIN relay Ignition switch ON 11 to 14 V
G183-10 (MREL) - C161-5 (E1) V - BR MAIN relay Ignition switch off
(2 sec. after ignition switch off)
0 to 1.5 V
G183-17 (TC) - C161-5 (E1) V - BR Terminal TC of DLC3 Ignition switch ON 11 to 14 V
G182-13 (W) - C161-5 (E1) V - BR MIL MIL illuminated 0 to 3 V
G182-13 (W) - C161-5 (E1) V - BR MIL MIL not illuminated 11 to 14 V
G183-12 (THWO) - C161-5 (E1) L - BR Combination meter assembly Ignition switch ON Pulse generation
(See waveform 1)
G182-25 (SP1) - C161-5 (E1) R - BR Speed signal from combination meter Ignition switch ON, slowly rotate wheel Pulse generation
(See waveform 2)
G182-6 (STA) - C161-5 (E1) W - BR Starter signal Cranking 6 V or more
G183-1 (+B) - C161-5 (E1) W - BR Power source of ECM Ignition switch ON 11 to 14 V
G183-11 (IGSW) - C161-5 (E1) W - BR Ignition switch Ignition switch ON 11 to 14 V
G182-9 (STP) - C161-5 (E1) V - BR Stop light switch Brake pedal depressed 11 to 14 V
G182-9 (STP) - C161-5 (E1) V - BR Stop light switch Brake pedal released Below 1.5 V
G182-12 (GIND) - C161-5 (E1) R - BR Glow indicator light Glow indicator light lights up 0 to 3 V
G182-12 (GIND) - C161-5 (E1) R - BR Glow indicator light Glow indicator light does not light up 11 to 14 V
G182-34(AC1) - C161-5 (E1) LG - BR A/C amplifier A/C switch on
(magnetic clutch on)
Below 1.5 V
G182-34 (AC1) - C161-5 (E1) LG - BR A/C amplifier A/C switch off 7.5 to 14 V
G183-9 (ACT) - C161-5 (E1) R - BR A/C amplifier Ignition switch ON 11 to 14 V
G182-34 (ACT) - C161-5 (E1) R - BR A/C amplifier A/C cut performed (driving below 30 km/h (18.6 mph), accelerator pedal fully depressed for 5 sec.) 0 to 3 V
G183-20 (VPA) - G183-27 (EPA) L - P Accelerator pedal position sensor (for engine control) Ignition switch ON, accelerator pedal released 0.6 to 1.0 V
Ignition switch ON, accelerator pedal depressed 3.0 to 4.6 V
G183-28 (VPA2) - G183-29 (EPA2) GR - BR Accelerator pedal position sensor (for sensor malfunction detection) Ignition switch ON, accelerator pedal released 1.4 to 1.8 V
Ignition switch ON, accelerator pedal depressed 3.7 to 5.0 V
G183-26 (VCPA) - G183-27 (EPA) LG - P Power source of accelerator pedal position sensor (for VPA) Ignition switch ON 4.5 to 5.0 V
G183-23 (VCP2) - G183-29 (EPA2) R - BR Power source of accelerator pedal position sensor (for VPA2) Ignition switch ON 4.5 to 5.0 V
G182-7 (TACH) - C161-5 (E1) P - BR Engine speed sensor Idling Pulse generation
(See waveform 3)
G182-10 (ST1-) - C161-5 (E1) B - BR Stop light switch Brake pedal depressed 0 to 1.5 V
Brake pedal released 7.5 to 14 V
C162-33 (PIM) - C162-32 (EPIM) L-B - B Manifold absolute pressure sensor 60 kPa (450 mmHg, 17.7 in.Hg) vacuum applied 0.2 to 0.8 V
207 kPa (1550 mmHg, 61.0 in.Hg) vacuum applied 4.2 to 4.8 V
C162-22 (THA) - C162-30 (ETHA) B - BR Intake air temperature sensor Idling, air intake temp. 0°C (32°F) to 80°C (176°F) 0.5 to 3.4 V
C162-21 (THW) - C162-29 (ETHW) R-L - BR Engine coolant temperature sensor Idling, engine coolant temp. 60°C (140°F) to 120°C (248°F) 0.2 to 1.0 V
C162-23 (THF) - C162-31 (ETHF) G-B - BR Fuel temperature sensor Ignition switch ON (engine cold) 0.5 to 3.4 V
C161-29 (DATA) - C161-5 (E1) Y - BR Injection pump Within 0.5 sec. after ignition switch ON Pulse generation
C161-28 (CLK) - C161-5 (E1) L - BR Injection pump Within 0.5 sec. after ignition switch ON Pulse generation
C162-15 (THOP) - C161-5 (E1) GR - BR Throttle open switch Idling (engine warmed up) 11 to 14 V
Ignition switch ON (once within 5 sec.) 0 to 3 V
C161-14 (LU-B) - C161-7 (E01) L-Y - W-B Throttle control motor
(intake shutter)
Racing (engine warmed up) Pulse generation
(See waveform 4)
C161-15 (LU+B) - C161-7 (E01) L-R - W-B Throttle control motor
(intake shutter)
Racing (engine warmed up) Pulse generation
(See waveform 4)
C161-16 (LU-A) - C161-7 (E01) L-W - W-B Throttle control motor
(intake shutter)
Racing (engine warmed up) Pulse generation
(See waveform 4)
C161-17 (LU+A) - C161-7 (E01) L-B - W-B Throttle control motor
(intake shutter)
Racing (engine warmed up) Pulse generation
(See waveform 4)
C161-11 (TCV) - C161-7 (E01) R-W - W-B Timing control valve Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 5)
C161-2 (SPV+) - C161-5 (E1) R-L - BR Spill control valve Ignition switch ON 11 to 14 V
Idling Pulse generation
C161-1 (SPV-) - C161-5 (E1) R-Y - BR Spill control valve Idling Pulse generation
(See waveform 7)
C162-26 (TDC+) - C162-34 (TDC-) G - R Crankshaft position sensor Idling Pulse generation
(See waveform 6)
C162-27 (NE+) - C162-35 (NE-) W - B Engine speed sensor Idling Pulse generation
(See waveform 6)
G183-25 (CANH) - C161-5 (E1) LG - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 8)
G183-31 (CANL) - C161-5 (E1) W - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 9)


Waveform 1


a.
A105099E08
0.333,0.677 0.875,0.875 0.542,0.198 10 false THWO 2.615,0.354 3.229,0.552 0.615,0.198 10 false 5 V/DIV. 2.688,1.156 3.083,1.354 0.396,0.198 10 false GND 1.167,1.792 2.01,1.99 0.844,0.198 10 false 0.1 sec./DIV.

A/C amplifier signal

Terminal No. (Symbol) G183-12 (THWO) - C161-5 (E1)
Tester Range 5 V/DIV., 0.1 sec./DIV.
Condition Idling

HINT:

Waveform time A changes according to coolant temperature.




Waveform 2


a.
A110545E06
2.469,0.552 3.01,0.719 0.542,0.167 10 false 2 V/DIV. 2.615,1.188 2.969,1.344 0.354,0.156 10 false GND 1.156,1.719 2.063,1.875 0.906,0.156 10 false 20 msec./DIV. 0.427,1.167 0.76,1.323 0.333,0.156 10 false SP1

Speed signal

Terminal No. (Symbol) G182-25 (SP1) - C161-5 (E1)
Tester Range 2 V/DIV., 20 msec./DIV.
Condition Driving at approx. 20 km/h (12.4 mph)

HINT:
·

As vehicle speed increases, the wavelength becomes shorter.

·

As vehicle speed increases, the waveform's amplitude becomes greater.





Waveform 3


a.
A110546E10
2.635,1.01 3,1.167 0.365,0.156 10 false GND 1.146,1.781 2.052,1.948 0.906,0.167 10 false 20 msec./DIV. 0.344,1.031 0.75,1.188 0.406,0.156 10 false TACH 2.49,0.458 3.052,0.615 0.563,0.156 10 false 5 V/DIV.

Engine speed signal

Terminal No. (Symbol) G182-7 (TACH) - C161-5 (E1)
Tester Range 5 V/DIV., 20 msec./DIV.
Condition Idling after warming up

HINT:

As engine speed increases, the wavelength becomes shorter.




Waveform 4


a.
A110547E04
2.469,0.479 3.115,0.635 0.646,0.156 10 false 10 V/DIV. 2.479,1.031 2.833,1.198 0.354,0.167 10 false GND 0.375,0.604 0.781,0.771 0.406,0.167 10 false LU+A 0.375,0.906 0.781,1.073 0.406,0.167 10 false LU+B 0.406,1.333 0.781,1.5 0.375,0.167 10 false LU-A 0.406,1.583 0.771,1.75 0.365,0.167 10 false LU-B 1.083,1.729 2.042,1.885 0.958,0.156 10 false 0.5 msec./DIV.

Throttle control motor signals

Terminal No. (Symbol) C161-17 (LU+A) - C161-7 (E01)
C161-15(LU+B) - C161-7 (E01)
C161-16 (LU-A) - C161-7 (E01)
C161-14 (LU-B) - C161-7 (E01)
Tester Range 10 V/DIV., 0.5 msec./DIV.
Condition Engine racing



Waveform 5


a.
A002482E09
1.24,1.938 2.146,2.115 0.906,0.177 10 false 10 msec./DIV. 0.281,0.5 0.656,0.698 0.375,0.198 10 false TCV 2.781,0.948 3.406,1.396 0.625,0.448 10 false 10 V/DIV. 2.813,1.844 3.177,2.01 0.365,0.167 10 false GND

Timing control value signal

Terminal No. (Symbol) C161-11 (TCV) - C161-7 (E01)
Tester Range 10 V/DIV., 10 msec./DIV.
Condition During idling



Waveform 6


a.
A002483E05
2.792,0.573 3.354,0.771 0.563,0.198 10 false 2 V/DIV. 0.26,0.583 0.656,0.781 0.396,0.198 10 false TDC 2.885,1.396 3.281,1.594 0.396,0.198 10 false GND 0.313,1.365 0.594,1.563 0.281,0.198 10 false NE 1.198,1.948 2.125,2.115 0.927,0.167 10 false 20 msec./DIV.

Crankshaft position sensor and engine speed sensor signals

Terminal No. (Symbol) C162-26 (TDC+) - C162-34 (TDC-)
C162-27 (NE+) - C162-35 (NE-)
Tester Range 2 V/DIV., 20 msec./DIV.
Condition During idling



Waveform 7


a.
A110550E05
2.469,0.479 3.125,0.625 0.656,0.146 10 false 20 V/DIV. 0.365,1.135 0.719,1.281 0.354,0.146 10 false SPV- 2.667,1.188 3.01,1.354 0.344,0.167 10 false GND 1.063,1.75 1.979,1.938 0.917,0.188 10 false 10 msec./DIV.

Spill control valve signal

Terminal No. (Symbol) C161-1 (SPV-) - C161-5 (E1)
Tester Range 20 V/DIV., 10 msec./DIV.
Condition During idling



Waveform 8


a.
G036660E22
2.625,1.396 3.01,1.594 0.385,0.198 10 false GND 2.385,0.333 2.969,0.531 0.583,0.198 10 false 1 V/DIV. 1.344,1.896 2.333,2.094 0.99,0.198 10 false 10 msec./DIV.

CAN Communication Signal

Terminal No. (Symbol) G183-25 (CANH) - C161-5 (E1)
Tester Range 1 V/DIV., 10 msec./DIV.
Condition Engine is stopped, ignition switch ON



Waveform 9


a.
G036660E22
2.625,1.396 3.01,1.594 0.385,0.198 10 false GND 2.385,0.333 2.969,0.531 0.583,0.198 10 false 1 V/DIV. 1.344,1.896 2.333,2.094 0.99,0.198 10 false 10 msec./DIV.

CAN Communication Signal

Terminal No. (Symbol) G183-31 (CANL) - C161-5 (E1)
Tester Range 1 V/DIV., 10 msec./DIV.
Condition Engine is stopped, ignition switch ON