Home › Engine / Hybrid System › 5L-E (ENGINE CONTROL) › ECD SYSTEM
RM27T0E _51 Engine / Hybrid System _053658 5L-E ENGINE CONTROL _0260445 ECD SYSTEM C

5L-E ENGINE CONTROL  ECD SYSTEM  P1611  ECM/PCM Processor / Run Pulse  


DESCRIPTION

DTC No. DTC Detection Condition Trouble Area
P1611 ECU malfunction ECM

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.READ OUTPUT DTC (INTERIOR IC DTC IS OUTPUT AGAIN)

b.

Turn the ignition switch to ON.


c.

Check the DTC (See page Engine / Hybrid System>5L-E (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR).

Result:
Display (DTC output) Proceed to
DTC P1611 is output again A
No DTC output B




A

B