Home › Engine / Hybrid System › 1KD-FTV (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053659 1KD-FTV ENGINE CONTROL _0260451 CRANKSHAFT POSITION SENSOR A

1KD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301K 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt and attach the 3 clamps.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


c.

Attach the connector to the vacuum transmitting pipe and connect the crankshaft position sensor connector.


Hide 51405A 2.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY