Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260459 VACUUM SWITCHING VALVE(for Engine Mounting) A

1GD-FTV ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  REMOVAL  


PROCEDURE

Hide 53737A 1.REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

A353025

a.

Remove the 6 clips and front No. 1 fender apron to frame seal LH.


Hide 25804A 3.REMOVE VACUUM SWITCHING VALVE SUB-ASSEMBLY

A353026

a.

Disconnect the connector and 2 clamps from the vacuum switching valve sub-assembly.


b.

Disconnect the 3 vacuum hoses.


c.

Remove the bolt, nut and vacuum switching valve sub-assembly.


d.

Remove the 2 vacuum hoses from the vacuum switching valve sub-assembly.