Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR › 2015.06–2018.06
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260469 MANIFOLD ABSOLUTE PRESSURE SENSOR A

1GD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421C 1.INSTALL DIESEL TURBO PRESSURE SENSOR

A332404E02
1.823,2.938 2.104,2.938 false 1.313,2.75 1.406,2.75 1.406,2.75 1.698,2.542 false 1.292,3.031 1.375,3.031 1.375,3.031 1.677,2.854 false 0.646,1.49 0.802,1.49 0.802,1.49 0.906,0.865 true 0.313,1.313 0.406,1.313 0.406,1.313 0.542,0.625 true 1.25,0.125 1.135,0.125 1.135,0.125 0.906,0.417 true 1.302,0.063 1.573,0.25 0.271,0.188 10 true *1 0.448,1.385 0.625,1.604 0.177,0.219 10 true *2 2.125,2.844 2.396,3.031 0.271,0.188 10 false *a 1.104,2.646 1.375,2.833 0.271,0.188 10 false *b 0.146,1.24 0.323,1.438 0.177,0.198 10 true *b 1.083,2.938 1.354,3.125 0.271,0.188 10 false *c

a.

Connect the vacuum hose to the diesel turbo pressure sensor.

Text in Illustration
*1 Diesel Turbo Pressure Sensor
*2 No. 3 Water By-pass Pipe Sub-assembly
*a Vacuum Hose
*b Protrusion
*c Paint Mark

NOTICE:

Connect the vacuum hose so that the paint mark on the vacuum hose is aligned with the protrusions of the diesel turbo pressure sensor as shown in the illustration.



b.

Install the diesel turbo pressure sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

Make sure the protrusion of the No. 3 water bypass pipe sub-assembly is inserted into the hole of the diesel turbo pressure sensor.



c.

Connect the diesel turbo pressure sensor connector.