35000
1.REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
Remove the automatic transmission (See page Drivetrain>AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE)>AUTOMATIC TRANSMISSION ASSEMBLY (for 1GR-FE)>REMOVAL).
33030
2.REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)
Remove the manual transmission (See page Drivetrain>RA61F (MANUAL TRANSMISSION / TRANSAXLE)>MANUAL TRANSMISSION ASSEMBLY (for 1GR-FE)>REMOVAL).
32101
3.REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)
31210
4.REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission)
31250
5.REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)
13405
6.REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)
11381A
7.REMOVE REAR CRANKSHAFT OIL SEAL
Using a knife, cut off the lip of the oil seal.
| *1 | Cut Position |
Using a screwdriver, pry out the oil seal.
Tape the screwdriver tip before use.
Do not damage the surface of the oil seal press fit hole or crankshaft.