53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
16470
2.REMOVE RADIATOR RESERVOIR
16711
3.REMOVE FAN SHROUD
13471
4.REMOVE CRANKSHAFT PULLEY
Using SST, hold the crankshaft pulley and loosen the pulley bolt until 2 or 3 threads are screwed into the crankshaft.
| *a | Loosen |
| *b | Hold |
Using SST and the pulley bolt, remove the crankshaft pulley.
| *a | Loosen |
| *b | Hold |
Apply lubricant to the threads and end of SST.
11301C
5.REMOVE TIMING CHAIN CASE OIL SEAL
Using a screwdriver, pry out the timing chain case oil seal.
| *a | Protective Tape |
Do not damage the surface of the timing chain case oil seal press fit hole or the crankshaft.
Check the crankshaft for damage after removing the timing chain case oil seal. If the crankshaft is damaged, smooth the surface with 400-grit sandpaper.
Tape the screwdriver tip before use.