Home › Engine / Hybrid System › 1GD-FTV (ENGINE MECHANICAL) › DRIVE BELT
RM27T0E _51 Engine / Hybrid System _053665 1GD-FTV ENGINE MECHANICAL _0260524 DRIVE BELT A

1GD-FTV ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 51405A 1.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Viscous Heater)

Hide 88359 2.REMOVE VISCOUS HEATER V BELT (w/ Viscous Heater)

a.
A358234

Loosen the 2 bolts.


b.
A346688

Turn the bolt to loosen the viscous heater V belt and reduce the tension. Then remove the viscous heater V belt.


Hide 16361A 3.REMOVE FAN AND GENERATOR V BELT

a.
A369938E01
1.656,3.729 2.073,3.729 true 1,4.052 1,4.302 true 2.094,3.625 2.323,3.792 0.229,0.167 10 true *a 0.938,4.323 1.167,4.49 0.229,0.167 10 true *b

While turning the V-ribbed belt tensioner assembly clockwise, align the service holes of the V-ribbed belt tensioner assembly, and then insert a pin with a diameter of 5.0 mm (0.197 in.) into the service holes to fix the V-ribbed belt tensioner assembly in place.

Text in Illustration
*a Service Hole
*b Pin


b.

Remove the fan and generator V belt.