Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053667 1GR-FE FUEL _0260551 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) A

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

a.
A331220E01
0.23,0.963 0.413,1.108 0.183,0.145 10 *1 0.435,1.05 0.757,1.05 false

Set the fuel sender gauge assembly on the fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

Text in Illustration
*1 Fuel Sub-tank
V100135

Slide


b.

Connect the fuel sender gauge connector.


Hide 83320B 2.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

a.
U169436E02
1.385,0.906 2.104,0.906 false 2.958,2.604 3.125,2.813 0.167,0.208 10 false A 2.115,0.813 2.333,1 0.219,0.188 10 false *1

Set the fuel sender gauge assembly on the fuel gauge support. Then slide the fuel sender gauge assembly upward to install it.

Text in Illustration
*1 Fuel Gauge Support
V100135

Slide

NOTICE:

Make sure the part labeled A in the illustration is securely inserted into the hole of the fuel gauge support before sliding the fuel sender gauge assembly upward.



b.
A334483E01
0.279,0.915 0.481,1.089 0.202,0.173 10 *1 1.668,1.005 0.498,1.005 false 2.206,1.47 2.443,1.653 0.237,0.182 10 *2 2.323,1.447 2.323,1.361 2.323,1.361 1.95,1.014 false

Install the 2 lead wires with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)

Text in Illustration
*1 Lead Wire (Black)
*2 Lead Wire (Red)

NOTICE:

Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.



Hide 77020A 3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for Fuel Main Tank)

a.

Install the fuel suction with pump and gauge tube assembly (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL PUMP (for Double Tank Type)>INSTALLATION).


Hide 77010 4.INSTALL FUEL TANK VENT TUBE ASSEMBLY (for Fuel Sub Tank)

a.

Install the fuel tank vent tube assembly (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL SUB TANK>INSTALLATION).