Home › Engine / Hybrid System › 5L-E (FUEL) › FUEL SYSTEM
RM27T0E _51 Engine / Hybrid System _053668 5L-E FUEL _0260557 FUEL SYSTEM G

5L-E FUEL  FUEL SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK FOR FUEL LEAK

a.

Check that there are no fuel leaks anywhere in the fuel system after performing maintenance.

HINT:

When checking for fuel leaks, make sure that there is pressure in the fuel line.



Hide 2.CHECK FUEL FILTER WARNING LIGHT AND DRAIN WATER

a.

Check the fuel filter multi-information display.

NOTICE:

When the fuel system warning is displayed on the multi-information display, replace the fuel filter (See page Engine / Hybrid System>5L-E (FUEL)>FUEL FILTER>REPLACEMENT) or drain the water in the fuel filter.



b.
A226183

Disconnect the level warning switch connector.


c.

Remove the 2 nuts and lift up the fuel filter.


d.
A226184

Connect a hose to the fuel filter drain plug. Place the other end of the hose into a container under the fuel filter drain plug.


e.

Loosen the fuel filter drain plug to drain water.


f.

Tighten the fuel filter drain plug by hand.

NOTICE:

Do not use any tools in this procedure.



g.

Install the fuel filter with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


h.

Connect the level warning switch connector.