Home › Engine / Hybrid System › 1GD-FTV (FUEL) › FUEL PUMP (for Double Tank Type) › 2015.06–2016.08
RM27T0E _51 Engine / Hybrid System _053670 1GD-FTV FUEL _0260579 FUEL PUMP(for Double Tank Type) A

1GD-FTV FUEL  FUEL PUMP(for Double Tank Type)  REMOVAL  


PROCEDURE

Hide 77100U 1.REMOVE FUEL TANK SUB-ASSEMBLY

Hide 77020A 2.REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

a.
A243483E02
0.299,0.182 0.611,0.366 0.311,0.184 10 SST 0.671,0.262 0.897,0.262 0.897,0.262 1.054,0.466 false

Set the 4 claws and plate of SST on the retainer.

SST
09808-14030  (09808-01010, 09808-01030, 09808-01040)

Text in Illustration
*a SST (Plate)
*b SST (Claw)
*c Insertion point

HINT:

Securely insert the ends of SST into the insertion points in the retainer.



b.
A243482E01
1.06,0.228 1.376,0.414 0.316,0.187 10 SST 1.438,0.308 1.616,0.308 1.616,0.308 1.788,0.666 false

Using SST, loosen the retainer.

SST
09808-14030  

NOTICE:
·

When the retainer is loosened, be careful as the fuel suction with pump and gauge tube assembly will spring upward from the force of the spring.

·

Remove any foreign matter around the fuel suction with pump and gauge tube assembly before this operation.



HINT:

Fit the tips of SST onto the ribs of the retainer.



c.

Remove the retainer.


d.

Remove the fuel suction with pump and gauge tube assembly from the fuel tank sub-assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



e.

Remove the gasket from the fuel tank sub-assembly.