Do not disconnect the hoses indicated in the illustration.
23221
1.INSTALL FUEL PUMP
Install the spacer and a new O-ring to the fuel pump.
| *1 | O-Ring |
| *2 | Spacer |
| *3 | Fuel Pump |
Apply a light coat of diesel fuel to the O-ring of the fuel pump.
Push in the fuel pump to the fuel suction plate sub-assembly.
2.CONNECT JET PUMP
Set the jet pump into the No. 1 fuel sub-tank. Then slide the jet pump downward to install it.
Make sure that the jet pump is attached at the 2 positions as shown in the illustration.
77785
3.INSTALL FUEL PUMP HARNESS
Connect the fuel pump harness connector to the fuel suction plate sub-assembly.
Connect the fuel pump harness connector to the fuel pump.
77024A
4.INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY
Attach the 3 claws to the claw holes to install the fuel suction plate sub-assembly.
83320
5.INSTALL FUEL SENDER GAUGE ASSEMBLY