1.REMOVE AIR CLEANER AND HOSE
2.REMOVE AIR CLEANER CASE
53736B
3.REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH
Remove the 5 clips and front No. 1 fender apron to frame seal.
17341
4.DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE
Disconnect the No. 1 air injection system hose.
17167
5.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 5 bolts and No. 1 exhaust manifold heat insulator.
It is only necessary to move the No. 1 exhaust manifold heat insulator so that the intake pipe can be removed in a later step.
It is not possible to fully remove the No. 1 exhaust manifold heat insulator in this step.
17117B
6.REMOVE NO. 4 INTAKE PIPE
Remove the 4 nuts, No. 4 intake pipe and 2 gaskets.
Be careful not to damage the installation surface of the gaskets.
25710
7.REMOVE AIR SWITCHING VALVE ASSEMBLY
Disconnect the vacuum hose.
Disconnect the connector.
Remove the 2 nuts and air switching valve.
Remove the No. 1 exhaust manifold heat insulator.