53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
11259
2.REMOVE V-BANK COVER
3.REMOVE AIR CLEANER CAP AND HOSE
4.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Remove the air cleaner filter element.
Detach the wire harness clamp.
Remove the 3 bolts and air cleaner case.
5.DISCONNECT WATER HOSE JOINT
Remove the bolt and disconnect the water hose joint.
17361
6.REMOVE AIR TUBE
Remove the 2 bolts, 2 nuts and air tube.
Remove the 2 gaskets from the air tube.
Be careful not to damage the installation surface of the gaskets.
25701
7.REMOVE EMISSION CONTROL VALVE SET
Disconnect the emission control valve set connector.
Disconnect the No. 1 air hose from the emission control valve set.
Remove the 3 nuts and emission control valve set.