Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR BYPASS VALVE SWITCHING VALVE › 2015.06–2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260621 EGR BYPASS VALVE SWITCHING VALVE A

1GD-FTV EMISSION CONTROL  EGR BYPASS VALVE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

a.

Install the No. 1 vacuum switching valve assembly to the bracket with the screw.

Torque:
1.4 N*m (14 kgf*cm, 12 in.*lbf)


b.

Connect the vacuum hose to the No. 1 vacuum switching valve assembly.


Hide 25804 2.INSTALL VACUUM CONTROL VALVE SET

a.

Install the vacuum control valve set to the intake manifold with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the 2 vacuum hoses to the No. 2 vacuum transmitting pipe sub-assembly and No. 2 EGR valve assembly.


c.

Connect the connector to the vacuum control valve set.


d.

Connect the engine wire bracket with the bolt.

Torque:
13 N*m (131 kgf*cm, 9 ft.*lbf)