Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (for Front) › 2015.06–2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260622 EXHAUST GAS TEMPERATURE SENSOR(for Front) A

1GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for Front)  INSTALLATION  


PROCEDURE

Hide 89425 1.INSTALL EXHAUST GAS TEMPERATURE SENSOR

a.
A329093E06
1.759,0.583 1.944,0.738 0.185,0.155 10 *a

Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor to the exhaust manifold converter sub-assembly.

Torque:

Specified tightening torque

30 N*m {306 kgf*cm, 22 ft.*lbf}


NOTICE:
·

If the No. 3 exhaust gas temperature sensor is dropped, replace the new one.

·

When reusing the No. 3 exhaust gas temperature sensors, clean the screws and apply anti-seize compound before installing the No. 3 exhaust gas temperature sensor.



HINT:
·

The connector color of the No. 3 exhaust gas temperature sensor is gray.

·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)



Text in Illustration
*a Torque Wrench Fulcrum Length


b.
A329093E06
1.759,0.583 1.944,0.738 0.185,0.155 10 *a

Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor to the exhaust manifold converter sub-assembly.

Torque:

Specified tightening torque

30 N*m {306 kgf*cm, 22 ft.*lbf}


NOTICE:
·

If the No. 2 exhaust gas temperature sensor is dropped, replace the new one.

·

When reusing the No. 2 exhaust gas temperature sensors, clean the screws and apply anti-seize compound before installing the No. 2 exhaust gas temperature sensor.



HINT:
·

The connector color of the No. 2 exhaust gas temperature sensor is black.

·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)



Text in Illustration
*a Torque Wrench Fulcrum Length


c.
A329093E06
1.759,0.583 1.944,0.738 0.185,0.155 10 *a

Using a 14 mm union nut wrench, install the exhaust gas temperature sensor to the exhaust manifold converter sub-assembly.

Torque:

Specified tightening torque

30 N*m {306 kgf*cm, 22 ft.*lbf}


NOTICE:
·

If the No. 3 exhaust gas temperature sensor is dropped, replace the new one.

·

When reusing the exhaust gas temperature sensors, clean the screws and apply anti-seize compound before installing the exhaust gas temperature sensor.



HINT:
·

The connector color of the exhaust gas temperature sensor is white.

·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)



Text in Illustration
*a Torque Wrench Fulcrum Length


d.
A346698E02
1.24,0.625 0.927,0.625 false 1.677,0.615 1.677,0.219 1.677,0.219 1.438,0.219 false 2.104,0.656 2.104,0.354 2.104,0.354 2.313,0.354 false 0.74,0.521 0.896,0.698 0.156,0.177 10 true *c 1.271,0.125 1.427,0.302 0.156,0.177 10 true *b 2.323,0.25 2.479,0.427 0.156,0.177 10 true *a

Attach the 3 colored connectors to the pipe clamp in the positions shown in the illustration.

Text in Illustration
*a White
*b Black
*c Gray


e.

Close the clamp of the pipe clamp, and install the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

Arrange the exhaust gas temperature sensor wires so that they do not contact each other.



f.

Connect the No. 3 exhaust gas temperature sensor to the No. 1 vacuum pipe.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


g.

Connect the 3 connectors to the 3 exhaust gas temperature sensor.