53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
52129B
2.REMOVE FRONT BUMPER COVER LOWER
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
4.DRAIN ENGINE COOLANT
11259
5.REMOVE V-BANK COVER
16572D
6.DISCONNECT NO. 2 RADIATOR HOSE
Disconnect the No. 2 radiator hose.
16031
7.REMOVE WATER INLET WITH THERMOSTAT
If the thermostat was not installed, cooling efficiency would decrease. Even if the engine tends to overheat, do not remove the thermostat.
Remove the 3 nuts, water inlet with thermostat and gasket.