Home › Engine / Hybrid System › 1GR-FE (COOLING) › RADIATOR › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053684 1GR-FE COOLING _0260675 RADIATOR A

1GR-FE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52119A 6.REMOVE FRONT BUMPER COVER

a.

Remove the front bumper cover (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER>REMOVAL).


Hide 52521 7.REMOVE UPPER FRONT BUMPER RETAINER

a.
A302327

Remove the 3 bolts and retainer.


Hide 53293C 8.REMOVE RADIATOR SIDE DEFLECTOR RH

a.
A302328

Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step below.


Hide 53294C 9.REMOVE RADIATOR SIDE DEFLECTOR LH

a.
A302329

Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step below.


Hide 16571C 10.REMOVE NO. 1 RADIATOR HOSE

A223076

Hide 16572D 11.REMOVE NO. 2 RADIATOR HOSE

a.
A223077

Disconnect the radiator hose from the water inlet.


b.
A223078

Detach the clamp and remove the radiator hose.


Hide 16470 12.REMOVE RADIATOR RESERVOIR

a.
A223079

Disconnect the reservoir hose from the upper side of the radiator tank.


b.

Remove the 3 bolts and radiator reservoir.


Hide 32907C 13.DISCONNECT OIL COOLER TUBE (w/ Warmer)

a.
A223080

Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.


Hide 32907C 14.DISCONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)

a.
A223081

Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.


Hide 16711 15.REMOVE FAN SHROUD

a.
A223082

Loosen the 4 nuts holding the fluid coupling fan.


b.

Remove the fan and generator V-belt (See page Engine / Hybrid System>1GR-FE (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL).


c.
A223083

Remove the 2 bolts holding the fan shroud.


d.

Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

NOTICE:

Be careful not to damage the radiator core.



e.

Remove the fan pulley from the water pump.


Hide 16400 16.REMOVE RADIATOR ASSEMBLY

a.
A223084E02
0.031,0.042 0.49,0.49 0.458,0.448 12 true *A 0.042,2.125 2.458,3.094 2.417,0.969 12 true *B

for Automatic Transmission:

Disconnect the 2 oil cooler hoses.

Text in Illustration
*A w/ Warmer
*B w/ Air Cooled Transmission Oil Cooler


b.
A223085

Remove the 4 bolts and radiator.


Hide 16561 17.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL

a.

Remove the seal from the radiator assembly.


Hide 16562 18.REMOVE NO. 2 RADIATOR TO SUPPORT SEAL

a.

Remove the seal from the radiator assembly.