Home › Engine / Hybrid System › 1GD-FTV (COOLING) › THERMOSTAT
RM27T0E _51 Engine / Hybrid System _053685 1GD-FTV COOLING _0260679 THERMOSTAT A

1GD-FTV COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 16711 1.REMOVE FAN SHROUD

Hide 87209 2.REMOVE WATER HOSE SUB-ASSEMBLY (for Cold Area Specification Vehicles)

a.
A351942

Remove the bolt and disconnect the water hose sub-assembly from the water inlet.


b.

Slide the 4 hose clamps and remove the water hose sub-assembly.


Hide 16207 3.DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A341230

Remove the 2 bolts and disconnect the No. 2 water by-pass pipe sub-assembly from the engine water pump assembly and water inlet.


Hide 16572D 4.DISCONNECT NO. 2 RADIATOR HOSE

a.

Slide the hose clamp and disconnect the No. 2 radiator hose from the water inlet.


Hide 16321 5.REMOVE WATER INLET

a.
A351911

Remove the 3 bolts and water inlet.


Hide 16331A 6.REMOVE THERMOSTAT

a.

Remove the thermostat from the engine water pump sub-assembly.


b.

Remove the gasket from the thermostat.