Home › Engine / Hybrid System › 2TR-FE (LUBRICATION) › ENGINE OIL COOLER
RM27T0E _51 Engine / Hybrid System _053686 2TR-FE LUBRICATION _0260685 ENGINE OIL COOLER A

2TR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Clean the contact surfaces of the oil filter bracket sub-assembly and oil cooler assembly.


b.

Apply a light coat of engine oil to a new O-ring and install it to the oil cooler assembly.


c.

Apply a light coat of engine oil to the threads of the oil cooler union bolt.


d.
U147798E03
2.958,0.271 2.875,0.271 2.875,0.271 2.833,0.427 true 2.646,0.885 2.719,0.885 2.719,0.885 2.813,0.542 true 2.438,0.781 2.635,0.969 0.198,0.188 10 true *a 2.979,0.198 3.208,0.365 0.229,0.167 10 true *b

Align the protrusion of the oil filter bracket with the cutout of the oil cooler assembly.

Text in Illustration
*a Cutout
*b Protrusion


e.

Install the oil cooler assembly with the plate washer and oil cooler union bolt.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


f.

Connect the No. 4 water by-pass hose and No. 5 water by-pass hose to the oil cooler assembly, and slide the 2 clamps to secure the hoses.


Hide 15601 2.INSTALL OIL FILTER SUB-ASSEMBLY