Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › ENGINE OIL COOLER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053687 1GR-FE LUBRICATION _0260691 ENGINE OIL COOLER A

1GR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install a new seal washer to the bolt.


b.

Install the oil cooler with the bolt and nut.

Torque:
for bolt : 68 N*m (693 kgf*cm, 50 ft.*lbf)
for nut : 10 N*m (102 kgf*cm, 7 ft.*lbf)


c.
A224741E01
2.807,1.156 2.984,1.324 0.177,0.168 10 *1 2.546,1.568 2.723,1.736 0.177,0.168 10 *2

Install the 2 hoses.

Text in Illustration
*1 Upward
*2 Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



Hide 16206 3.CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A224742E01
2.845,1.128 3.010,1.291 0.165,0.163 10 *1 2.586,1.549 2.751,1.712 0.165,0.163 10 *2

Connect the 2 hoses and water by-pass pipe.

Text in Illustration
*1 Upward
*2 Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



b.

Install the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51405A 11.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY