Home › Engine / Hybrid System › 5L-E (LUBRICATION) › ENGINE OIL COOLER
RM27T0E _51 Engine / Hybrid System _053688 5L-E LUBRICATION _0260696 ENGINE OIL COOLER A

5L-E LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install 2 new gaskets and the oil cooler to the filter bracket with the 4 nuts.

Torque:
16 N*m (158 kgf*cm, 11 ft.*lbf)


Hide 15609 2.INSTALL OIL FILTER BRACKET SUB-ASSEMBLY

a.
A118122E01
2.255,1.436 2.557,1.672 0.302,0.236 1.346,0.524 1.535,0.683 0.189,0.159 10 *1 2.322,1.473 2.510,1.632 0.189,0.159 10 *1

Install a new gasket and the oil filter bracket with the 10 bolts and 2 nuts.

Torque:
30 N*m (301 kgf*cm, 22 ft.*lbf)

Text in Illustration
*1 Nut


Hide 29300A 4.CONNECT VACUUM PUMP OIL INLET HOSE

a.
A118121E05
1.458,1.979 1.573,1.979 1.573,1.979 1.646,1.594 true 1.271,1.875 1.49,2.073 0.219,0.198 10 false *1

Connect the vacuum pump oil inlet hose with a new gasket and the union bolt.

Torque:
14 N*m (140 kgf*cm, 10 ft.*lbf)

HINT:

When tightening the inlet hose, hang the stopper-bar of the inlet hose on the filter bracket to prevent the inlet hose from rotating.

Text in Illustration
*1 Stopper-bar



Hide 17141 5.INSTALL EXHAUST MANIFOLD

Hide 27020 6.INSTALL GENERATOR ASSEMBLY