Home › Engine / Hybrid System › 1GD-FTV (STARTING) › GLOW PLUG
RM27T0E _51 Engine / Hybrid System _053695 1GD-FTV STARTING _0260741 GLOW PLUG A

1GD-FTV STARTING  GLOW PLUG  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Make sure to wear protective gloves when performing work to avoid burns.


PROCEDURE

Hide 1. WARM UP ENGINE

NOTICE:

To protect the glow plug assembly from damage, before removing the glow plug assembly, make sure to warm up the engine.


Hide 23810A 2.REMOVE COMMON RAIL ASSEMBLY

Hide 19871 3.REMOVE NO. 1 GLOW PLUG CONNECTOR

CAUTION:

Make sure to wear protective gloves when performing work to avoid burns.


a.
A346967

Using an E8 "TORX" socket wrench, remove the stud bolt from the intake manifold.


b.
A346968

Remove the 4 glow plug screw grommets.


c.
A346969

Remove the 4 nuts and No. 1 glow plug connector.


Hide 19850 4.REMOVE GLOW PLUG ASSEMBLY

CAUTION:

Make sure to wear protective gloves when performing work to avoid burns.


a.
A346970

Using a 10 mm deep socket wrench, remove the 4 glow plug assemblies.