Home › Engine / Hybrid System › CRUISE CONTROL › CLUTCH SWITCH (for RHD)
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260753 CLUTCH SWITCH(for RHD) A

CRUISE CONTROL  CLUTCH SWITCH(for RHD)  INSTALLATION  


PROCEDURE

Hide 88280A 1.INSTALL CLUTCH SWITCH ASSEMBLY

a.
B237865

Temporarily install the clutch switch assembly with the adjusting nut.


b.
B237866E01
0.647,0.557 0.841,0.729 0.195,0.172 10 *1 0.647,1.149 0.861,1.335 0.215,0.186 10 *2 1.661,1.096 1.097,0.631 1.097,0.631 0.867,0.631 false 1.649,1.449 1.076,1.224 1.076,1.224 0.87,1.224 false

Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)

Text in Illustration
*1 Adjusting Nut
*2 Cushion

NOTICE:

After adjusting the pedal free play, perform the clutch switch assembly adjustment (See page Drivetrain>CLUTCH>CLUTCH PEDAL (for RHD)>ADJUSTMENT).



Hide 55105D 2.INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY WITH CLUTCH MASTER CYLINDER

a.

Install the clutch pedal support sub-assembly with clutch master cylinder (See page Drivetrain>CLUTCH>CLUTCH PEDAL (for RHD)>INSTALLATION).