Home › Drivetrain › CLUTCH › CLUTCH PEDAL (for RHD)
RM27T0E _52 Drivetrain _053699 CLUTCH _0260793 CLUTCH PEDAL(for RHD) A

CLUTCH  CLUTCH PEDAL(for RHD)  INSTALLATION  


PROCEDURE

Hide 31453B 1.INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

U170071E01
0.453,1.916 0.644,2.089 0.191,0.173 10 *1

a.

Apply MP grease to the inside of a new clevis bush.

Text in Illustration
*1 MP grease


b.

Install the clevis bush to the clutch pedal.

HINT:

Install the clevis bush from the left side of the vehicle.



Hide 31301P 2.INSTALL CLUTCH PEDAL TURNOVER BUSH

U170070E01
0.474,1.898 0.664,2.072 0.191,0.173 10 *1

a.

Apply MP grease to the clutch pedal turnover bush.

Text in Illustration
*1 MP grease


b.

Install the turnover bush to the clutch pedal.


Hide 31301B 3.INSTALL NO. 1 CLUTCH PEDAL CUSHION

a.

Install the 3 cushions to the clutch pedal.


Hide 31324A 4.INSTALL CLUTCH PEDAL SHAFT COLLAR

U170229E01
0.449,1.934 0.640,2.107 0.191,0.173 10 *1

a.

Apply MP grease to the shaft collar.

Text in Illustration
*1 MP grease


b.

Install the shaft collar to the clutch pedal.


Hide 31301C 5.INSTALL CLUTCH PEDAL BUSH

U170228E01
0.453,1.934 0.644,2.107 0.191,0.173 10 *1

a.

Apply MP grease to 2 new bushes.

Text in Illustration
*1 MP grease


b.

Install the 2 bushes to the clutch pedal.


Hide 31321 6.INSTALL CLUTCH PEDAL PAD

Hide 7.INSTALL CLUTCH PEDAL STOPPER BOLT (for 5L-E)

a.

Install the stopper bolt and temporarily install the lock nut.

HINT:

Tighten the lock nut to the specified torque when adjusting the clutch pedal.



Hide 88280C 8.INSTALL CLUTCH SWITCH ASSEMBLY

a.

Install the clutch switch and temporarily install the lock nut.

HINT:

Tighten the lock nut to the specified torque when adjusting the clutch pedal.



Hide 31353 9.INSTALL CLUTCH PEDAL SPRING HOLDER

U170069E01
0.47,1.917 0.661,2.090 0.191,0.173 10 *1

a.

Apply MP grease to the contact surface of the spring holder.

Text in Illustration
*1 MP grease


b.

Install the spring holder.


Hide 31301 10.INSTALL CLUTCH PEDAL SUB-ASSEMBLY

a.

Install the clutch pedal and washer to the clutch pedal support with the nut and bolt.

Torque:
34 N*m (350 kgf*cm, 25 ft.*lbf)

HINT:

Install the bolt from the left side of the vehicle.



Hide 11.INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING

a.

Install the compression spring to the clutch pedal and spring holder.


Hide 84520 12.INSTALL CLUTCH START SWITCH ASSEMBLY

Hide 13.INSTALL CLUTCH PEDAL ASSEMBLY

a.

Install the clutch pedal with the bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 31410 14.INSTALL CLUTCH MASTER CYLINDER ASSEMBLY

a.

Install the clutch master cylinder (See page Drivetrain>CLUTCH>CLUTCH MASTER CYLINDER (for RHD)>INSTALLATION).


Hide 73900 15.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

a.

Install the lower No. 1 instrument panel airbag (See page Vehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION).