Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › 2015.06–2020.08
RM27T0E _52 Drivetrain _053697 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0260764 TRANSMISSION CONTROL CABLE A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 33820B 2.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C214423

Disconnect the transmission control cable end from the shift lever.


c.
C214430

Rotate the socket counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.

NOTICE:

Do not over-rotate the nut as it will come off the internal spring and the transmission control cable will not be reusable.



d.
C214587

Remove the nut and clip, and disconnect the transmission control cable assembly from the automatic transmission.


e.
C214918

Remove the 2 nuts and disconnect the ground cable and transmission control cable support.


f.
C214919

Remove the 2 nuts and detach the 3 claws, and then pull out the transmission control cable.