Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH
RM27T0E _52 Drivetrain _053698 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0260773 PARK / NEUTRAL POSITION SWITCH N

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 84540 2.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

While pushing the shift lock release button, move the shift lever to N.


b.

Remove the bolt of the park/neutral position switch assembly.


c.

Clean the bolt and bolt hole.


d.

Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



e.
U118093E10
1.969,0.885 2.813,0.885 true 2,1.542 2.813,1.542 true 1.969,0.563 1.969,1.188 false 2.833,0.792 3,0.948 0.167,0.156 10 false *a 2.833,1.448 3,1.604 0.167,0.156 10 false *b

Align the neutral basic line with the groove as shown in the illustration.

Text in Illustration
*a Neutral Basic Line
*b Groove


f.

Hold the park/neutral position switch assembly in position and install the bolt.

Torque:
13 N*m (131 kgf*cm, 9 ft.*lbf)


g.

After the adjustment, perform the park/neutral position switch assembly operation check.

(See page Drivetrain>AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE)>PARK / NEUTRAL POSITION SWITCH>ON-VEHICLE INSPECTION)