AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE)
AUTOMATIC TRANSMISSION SYSTEM (for 1GR-FE)
- PRECAUTION2015.06–2020.08from 2020.08
- DEFINITION OF TERMS
- PARTS LOCATION2015.06–2017.082017.08–2020.08from 2020.08
- SYSTEM DIAGRAM2015.06–2017.082017.08–2020.08from 2020.08
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- ROAD TEST2015.06–2020.08from 2020.08
- MECHANICAL SYSTEM TESTS
- HYDRAULIC TEST
- MANUAL SHIFTING TEST2015.06–2017.08from 2017.08
- INITIALIZATION
- MONITOR DRIVE PATTERN
- PROBLEM SYMPTOMS TABLE2015.06–2017.082017.08–2020.08from 2020.08
- TERMINALS OF ECM2015.06–2017.082017.08–2020.08from 2020.08
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR2015.06–2017.082017.08–2020.08from 2020.08
- CHECK MODE PROCEDURE
- FAIL-SAFE CHART
- DATA LIST / ACTIVE TEST2015.06–2017.082017.08–2020.08from 2020.08
- DIAGNOSTIC TROUBLE CODE CHART2015.06–2017.08from 2017.08
- VEHICLE CONTROL HISTORY from 2017.08
- P0705 One of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously (2...
- P0711 Either condition is met: (2 trip detection logic) · (a) Certain monitor enabling conditions are met and the...
- P0712, P0713
- P0717, P07BF, P07C0
- P0722, P077C, P077D
- P0741 Lock-up does not occur when requested (2 trip detection logic).
- P0746 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 1st, 2nd, 3rd or...
- P0748 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P0776 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 4th, 5th or 6th...
- P0778 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P0796 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 2nd or 6th gear is...
- P0798 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P2714 The ECM detects a malfunction in the shift solenoid valve SLT (ON side) according to the difference in the...
- P2716 Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip...
- P2742, P2743
- P2757 Both conditions are met (2 trip detection logic): · Lock-up does not occur when requested. · Lock-up occurs...
- P2759 Open or short is detected in shift solenoid valve SLU circuit for 1 second or more while driving (1 trip...
- P2769, P2770
- P2773 Transfer L4 position switch remains on while the vehicle is being driven under the following conditions for...2015.06–2017.08from 2017.08
- P2774 Transfer L4 position switch remains off while the vehicle is being driven under the following conditions for...2015.06–2017.08from 2017.08
- P2808 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 3rd or 5th gear is...
- P2810 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- Transmission Control Switch Circuit2015.06–2020.08from 2020.08
- Shift Paddle Switch Circuit from 2020.08
- Pattern Select Switch Sport Mode Circuit from 2017.08
- Pattern Select Switch 2nd Start Mode Circuit2015.06–2017.08from 2017.08
- L4 Position Switch Circuit2015.06–2017.08from 2017.08
AUTOMATIC TRANSMISSION SYSTEM (for 1GD-FTV)
- PRECAUTION2015.06–2020.08from 2020.08
- DEFINITION OF TERMS
- PARTS LOCATION2015.06–2017.082017.08–2020.08from 2020.08
- SYSTEM DIAGRAM2015.06–2017.082017.08–2020.08from 2020.08
- SYSTEM DESCRIPTION2015.06–2020.08from 2020.08
- HOW TO PROCEED WITH TROUBLESHOOTING
- ROAD TEST2015.06–2020.08from 2020.08
- MECHANICAL SYSTEM TESTS2015.06–2020.08from 2020.08
- HYDRAULIC TEST2015.06–2017.082017.08–2020.08from 2020.08
- MANUAL SHIFTING TEST2015.06–2017.08from 2017.08
- INITIALIZATION2015.06–2020.08from 2020.08
- MONITOR DRIVE PATTERN2015.06–2020.08from 2020.08
- PROBLEM SYMPTOMS TABLE2015.06–2017.082017.08–2020.08from 2020.08
- TERMINALS OF ECM2015.06–2017.082017.08–2020.08from 2020.08
- DIAGNOSIS SYSTEM2015.06–2020.08from 2020.08
- DTC CHECK / CLEAR2015.06–2017.082017.08–2020.08from 2020.08
- CHECK MODE PROCEDURE2015.06–2020.08from 2020.08
- FAIL-SAFE CHART
- DATA LIST / ACTIVE TEST2015.06–2017.082017.08–2020.082020.08–2021.06from 2021.06
- DIAGNOSTIC TROUBLE CODE CHART2015.06–2017.082017.08–2018.062018.06–2020.08from 2020.08
- VEHICLE CONTROL HISTORY from 2017.08
- P0705 One of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously (2...2015.06–2017.082017.08–2020.08
- P070513, P070562 from 2020.08
- P071000 from 2020.08
- P071011 from 2020.08
- P071015 from 2020.08
- P0711 Either condition is met: (2 trip detection logic) · (a) Certain monitor enabling conditions are met and the... 2015.06–2020.08
- P0712, P0713 2015.06–2020.08
- P0715, P0717 2015.06–2017.08
- P071512, P071514, P071531 from 2020.08
- P0717, P07BF, P07C02017.08–2018.062018.06–2020.08
- P0720, P0722 2015.06–2017.08
- P072012, P072014, P072031 from 2020.08
- P0722, P077C, P077D2017.08–2018.062018.06–2020.08
- P074011 from 2020.08
- P074015 from 2020.08
- P07407F from 2020.08
- P0741 Lock-up does not occur when requested (2 trip detection logic). 2015.06–2020.08
- P074513 from 2020.08
- P07457F from 2020.08
- P0746 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 1st, 2nd, 3rd or... 2015.06–2020.08
- P0748 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...2015.06–2017.082017.08–2020.08
- P077513 from 2020.08
- P07757F from 2020.08
- P0776 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 4th, 5th or 6th... 2015.06–2020.08
- P0778 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...2015.06–2017.082017.08–2020.08
- P079513 from 2020.08
- P07957F from 2020.08
- P0796 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 2nd or 6th gear is... 2015.06–2020.08
- P0798 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid... 2015.06–2020.08
- P17029F from 2020.08
- P170300 from 2020.08
- P271313 from 2020.08
- P27137F from 2020.08
- P2714 The ECM detects a malfunction in the shift solenoid valve SLT (ON side) according to the difference in the... 2015.06–2020.08
- P2716 Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip... 2015.06–2020.08
- P274011 from 2020.08
- P274015 from 2020.08
- P2742, P2743 2015.06–2020.08
- P275613 from 2020.08
- P27567F from 2020.08
- P2757 Both conditions are met (2 trip detection logic): · Lock-up does not occur when requested. · Lock-up occurs... 2015.06–2020.08
- P2759 Open or short is detected in shift solenoid valve SLU circuit for 1 second or more while driving (1 trip... 2015.06–2020.08
- P2769, P2770 2015.06–2020.08
- P277111 from 2020.08
- P277115 from 2020.08
- P2773 Transfer L4 position switch remains on while the vehicle is being driven under the following conditions for...2015.06–2017.082017.08–2020.08
- P2774 Transfer L4 position switch remains off while the vehicle is being driven under the following conditions for...2015.06–2017.082017.08–2020.08
- P280713 from 2020.08
- P28077F from 2020.08
- P2808 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 3rd or 5th gear is... 2015.06–2020.08
- P2810 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid... 2015.06–2020.08
- Transmission Control Switch Circuit2015.06–2020.08from 2020.08
- Shift Paddle Switch Circuit from 2020.08
- Pattern Select Switch Sport Mode Circuit2017.08–2020.08from 2020.08
- Pattern Select Switch 2nd Start Mode Circuit2015.06–2017.082017.08–2020.08from 2020.08
AUTOMATIC TRANSMISSION SYSTEM (for 2TR-FE)
- PRECAUTION2015.06–2020.08from 2020.08
- DEFINITION OF TERMS
- PARTS LOCATION2015.06–2017.082017.08–2020.08from 2020.08
- SYSTEM DIAGRAM2015.06–2017.082017.08–2020.08from 2020.08
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- ROAD TEST2015.06–2020.08from 2020.08
- MECHANICAL SYSTEM TESTS
- HYDRAULIC TEST2015.06–2017.08from 2017.08
- MANUAL SHIFTING TEST2015.06–2017.08from 2017.08
- INITIALIZATION
- MONITOR DRIVE PATTERN
- PROBLEM SYMPTOMS TABLE2015.06–2017.082017.08–2020.08from 2020.08
- TERMINALS OF ECM2015.06–2017.082017.08–2020.08from 2020.08
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR2015.06–2017.082017.08–2020.08from 2020.08
- CHECK MODE PROCEDURE
- FAIL-SAFE CHART
- DATA LIST / ACTIVE TEST2015.06–2017.082017.08–2020.08from 2020.08
- DIAGNOSTIC TROUBLE CODE CHART2015.06–2017.08from 2017.08
- VEHICLE CONTROL HISTORY from 2017.08
- P0705 One of the following conditions is met: (A) Any 2 or more of the following signals are ON simultaneously (2...
- P0711 Either condition is met: (2 trip detection logic) · (a) Certain monitor enabling conditions are met and the...
- P0712, P0713
- P0717, P07BF, P07C0
- P0722, P077C, P077D
- P0741 Lock-up does not occur when requested (2 trip detection logic).
- P0746 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 1st, 2nd, 3rd or...
- P0748 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P0776 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 4th, 5th or 6th...
- P0778 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P0796 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 2nd or 6th gear is...
- P0798 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- P2714 The ECM detects a malfunction in the shift solenoid valve SLT (ON side) according to the difference in the...
- P2716 Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip...
- P2742, P2743
- P2757 Both conditions are met (2 trip detection logic): · Lock-up does not occur when requested. · Lock-up occurs...
- P2759 Open or short is detected in shift solenoid valve SLU circuit for 1 second or more while driving (1 trip...
- P2769, P2770
- P2773 Transfer L4 position switch remains on while the vehicle is being driven under the following conditions for...2015.06–2017.08from 2017.08
- P2774 Transfer L4 position switch remains off while the vehicle is being driven under the following conditions for...2015.06–2017.08from 2017.08
- P2808 Either condition is met (2 trip detection logic): · The engine revs freely when a shift to 3rd or 5th gear is...
- P2810 An open or short circuit (output signal duty is 0% or 100%) is detected by the ECM in the shift solenoid...
- Transmission Control Switch Circuit2015.06–2020.08from 2020.08
- Shift Paddle Switch Circuit from 2020.08
- Pattern Select Switch 2nd Start Mode Circuit2015.06–2017.08from 2017.08
- L4 Position Switch Circuit2015.06–2017.08from 2017.08
AUTOMATIC TRANSMISSION FLUID
SPEED SENSOR
TRANSMISSION WIRE
VALVE BODY ASSEMBLY
PARK / NEUTRAL POSITION SWITCH
OIL COOLER (for 1GR-FE)
OIL COOLER (for 1GD-FTV)
OIL COOLER (for 2TR-FE)
SHIFT LEVER
COMBINATION SWITCH
SHIFT PADDLE SWITCH
TRANSMISSION CONTROL CABLE
TRANSFER ADAPTER OIL SEAL
AUTOMATIC TRANSMISSION ASSEMBLY (for 1GR-FE)
AUTOMATIC TRANSMISSION ASSEMBLY (for 1GD-FTV)
AUTOMATIC TRANSMISSION ASSEMBLY (for 2TR-FE)
AUTOMATIC TRANSMISSION UNIT (for 1GR-FE)
AUTOMATIC TRANSMISSION UNIT (for 1GD-FTV)
AUTOMATIC TRANSMISSION UNIT (for 2TR-FE)
TORQUE CONVERTER AND DRIVE PLATE
OIL PUMP