Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER (for LHD)
RM27T0E _52 Drivetrain _053699 CLUTCH _0260794 CLUTCH MASTER CYLINDER(for LHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for LHD)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID FROM CLUTCH LINE

Hide 31434 2.DISCONNECT CLUTCH RESERVOIR TUBE

C215412

a.

Disconnect the clutch reservoir tube.

HINT:

Use a container to collect the fluid.



Hide 31481 3.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

C215413

a.

Using a union nut wrench, disconnect the flexible hose tube.

HINT:

Use a container to collect the fluid.



Hide 82730A 4.REMOVE DRIVER SIDE JUNCTION BLOCK ASSEMBLY

a.

Remove the driver side junction block (See page Power Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL).


Hide 5.REMOVE CLUTCH PEDAL WITH CLUTCH MASTER CYLINDER

a.

Disconnect the clutch start switch connector.


b.

w/ Cruise Control:

Disconnect the clutch switch connector.


c.
C215414

Remove the 2 nuts, bolt and clutch pedal with clutch master cylinder.


Hide 31410 6.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C215415

Disconnect the clutch reservoir hose.


b.
C215416

Using a union nut wrench, disconnect the flexible tube.


c.
C215417

Remove the nut and clutch start switch from the clutch pedal support.


d.
C215418

Remove the clip and pin, and separate the push rod clevis from the clutch pedal.


e.
C215419

Remove the 2 bolts and clutch master cylinder.