33030
1.REMOVE MANUAL TRANSMISSION ASSEMBLY
Remove the manual transmission assembly (See page Drivetrain>R150F (MANUAL TRANSMISSION / TRANSAXLE)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL).
31204
2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
Remove the release fork and release bearing from the clutch housing.
31230
3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY
Remove the clip and release bearing from the release fork.
31126
4.REMOVE CLUTCH RELEASE FORK BOOT
31236B
5.REMOVE RELEASE FORK SUPPORT
Remove the release fork support from the manual transmission unit.
31210
6.REMOVE CLUTCH COVER ASSEMBLY
Place matchmarks on the clutch cover and flywheel.
| *a | Matchmark |
Loosen each set bolt one turn at a time until spring tension is released.
Remove the 6 set bolts and pull off the clutch cover.
Do not drop the clutch disc.
31250
7.REMOVE CLUTCH DISC ASSEMBLY
Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.