Home › Drivetrain › CLUTCH › CLUTCH UNIT(for 1GD-FTV)
RM27T0E _52 Drivetrain _053699 CLUTCH _0260807 CLUTCH UNIT(for 1GD-FTV) A

CLUTCH  CLUTCH UNIT(for 1GD-FTV)  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C215512

Remove the release fork and release bearing from the clutch housing.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
D029026

Remove the clip and release bearing from the release fork.


Hide 31126 4.REMOVE CLUTCH RELEASE FORK BOOT

Hide 31236B 5.REMOVE RELEASE FORK SUPPORT

a.

Remove the release fork support from the manual transmission unit.


Hide 31210 6.REMOVE CLUTCH COVER ASSEMBLY

a.
C215513E01
0.509,1.753 0.716,1.956 0.207,0.202 10 *a 1.038,1.296 0.73,1.847 false 0.73,1.847 1.147,1.241 false

Place matchmarks on the clutch cover and flywheel.

Text in Illustration
*a Matchmark


b.

Loosen each set bolt one turn at a time until spring tension is released.


c.

Remove the 6 set bolts and pull off the clutch cover.

NOTICE:

Do not drop the clutch disc.



Hide 31250 7.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.