Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE FRONT WHEEL
47750
2.REMOVE DISC BRAKE CYLINDER ASSEMBLY LH
43512
3.REMOVE FRONT DISC
43514C
4.REMOVE FRONT AXLE HUB GREASE CAP
Using a screwdriver and hammer, remove the front axle hub grease cap.
Do not damage the axle hub.
43502H
5.REMOVE FRONT AXLE SHAFT NUT
Remove the cotter pin and lock cap.
Remove the front axle shaft nut.
43502C
6.REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH
Remove the 4 bolts.
Using a plastic-faced hammer, tap out the front drive shaft from the front axle hub.
Be careful not to damage the drive shaft boot.
Remove the front axle hub and front disc dust cover.
Remove the O-ring.