Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
86452E
1.INSTALL CENTER CLUSTER MODULE PANEL
Install the center cluster module panel to the center cluster module switch (rear differential lock control switch) with the 4 screws.
55936E
2.INSTALL CENTER CLUSTER MODULE SWITCH (REAR DIFFERENTIAL LOCK CONTROL SWITCH)
Connect the connector.
Attach the 3 clips and install the center cluster module switch (rear differential lock control switch) with the 2 bolts.
58831A
3.INSTALL FRONT CONSOLE UPPER PANEL GARNISH
55448A
4.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
55449C
5.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55436A
6.INSTALL INSTRUMENT PANEL FINISH PANEL END LH
55435A
7.INSTALL INSTRUMENT PANEL FINISH PANEL END RH
84010A
8.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY