Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
84010A
1.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
2.REMOVE INSTRUMENT PANEL FINISH PANEL END LH
55435A
3.REMOVE INSTRUMENT PANEL FINISH PANEL END RH
55448A
4.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
55449C
5.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
58831A
6.REMOVE FRONT CONSOLE UPPER PANEL GARNISH
55936E
7.REMOVE CENTER CLUSTER MODULE SWITCH (REAR DIFFERENTIAL LOCK CONTROL SWITCH)
Remove the 2 bolts.
Detach the 3 clips.
Disconnect the connector and remove the center cluster module switch (rear differential lock control switch).
86452E
8.REMOVE CENTER CLUSTER MODULE PANEL
Remove the 4 screws and center cluster module panel from the center cluster module switch (rear differential lock control switch).