Home › Suspension › SUSPENSION CONTROL › CONTROL VALVE ASSEMBLY › 2015.06–2020.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260875 CONTROL VALVE ASSEMBLY A

SUSPENSION CONTROL  CONTROL VALVE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 48960 1.INSTALL NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY

a.

Install the No. 2 height control valve with the 2 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 2.CONNECT HEIGHT CONTROL TUBE

a.

Connect the 3 height control tubes (See page Suspension>SUSPENSION CONTROL>SUSPENSION CONTROL SYSTEM (w/ Air Suspension)>PRECAUTION).

HINT:

For the connection procedure of the tubes (type 1 and type 2), refer to Precaution of the Suspension Control System section.



b.

Connect the connector.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).