Home › Suspension › SUSPENSION CONTROL › CONTROL VALVE ASSEMBLY
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260875 CONTROL VALVE ASSEMBLY G

SUSPENSION CONTROL  CONTROL VALVE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 48096 1.INSPECT NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY

a.
C214512E19
1.719,1.281 2.01,1.75 false 2.083,1.198 2.927,1.198 2.927,1.198 2.927,1.656 false 1.313,1.198 0.792,1.198 0.792,1.198 0.792,1.719 false 0.063,0.083 0.365,0.292 0.302,0.208 12 false *a 0.646,1.74 0.958,1.927 0.313,0.188 10 false RH+ 2.021,1.771 2.229,1.958 0.208,0.188 10 false E 2.802,1.677 3.115,1.865 0.313,0.188 10 false LH+

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (LH+) - 2 (E) 15 to 25°C (59 to 77°F) 10 to 14 Ω
3 (RH+) - 2 (E)


Text in Illustration
*a Component without harness connected
(No. 2 Height Control Valve)


b.

Check the operating sound of the height control valve when battery voltage is applied to the terminals.

OK:
Measurement Condition Specified Condition
1 (LH+) - 2 (E) Sound of No. 2 height control valve operating can be heard
3 (RH+) - 2 (E)


If the result is not as specified, replace the No. 2 height control valve sub-assembly.