Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL OFF SWITCH › 2015.06–2017.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260882 HEIGHT CONTROL OFF SWITCH G

SUSPENSION CONTROL  HEIGHT CONTROL OFF SWITCH  INSPECTION  


PROCEDURE

Hide 55936E 1.INSPECT CENTER CLUSTER MODULE SWITCH (HEIGHT CONTROL OFF SWITCH)

a.
C281308E16
2.042,0.927 2.406,0.208 2.406,0.208 2.677,0.208 true 0.74,1.26 1.031,1.792 1.031,1.792 1.313,1.792 true 2.75,0.104 2.99,0.292 0.24,0.188 10 false N 1.375,1.688 1.552,1.875 0.177,0.188 10 false E 0.083,0.094 0.323,0.281 0.24,0.188 10 false *a

Measure the resistance according to the values in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (N) - 24(E) Height control OFF switch pressed Below 1 Ω
Height control OFF switch not pressed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Height Control OFF Switch)

If the result is not as specified, replace the center cluster module switch (height control OFF switch).