55936E
1.INSPECT CENTER CLUSTER MODULE SWITCH (HEIGHT CONTROL SWITCH)
Measure the resistance according to the values in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 7 (LO) - 24 (E) | "Down" pressed | Below 1 Ω |
| "Up" pressed | 10 kΩ or higher | |
| 6 (HI) - 24 (E) | "Down" pressed | 10 kΩ or higher |
| "Up" pressed | Below 1 Ω |
| *a | Component without harness connected
(Height Control Switch) |
If the result is not as specified, replace the center cluster module switch (height control switch).