Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE FRONT WHEEL
52129B
2.REMOVE LOWER FRONT BUMPER COVER (w/ KDSS)
3.REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY (w/ KDSS)
4.REMOVE FRONT STABILIZER END BRACKET (w/ KDSS)
48811
5.REMOVE FRONT STABILIZER BAR (w/ KDSS)
6.DISCONNECT FRONT SHOCK ABSORBER WITH COIL SPRING
Remove the bolt, nut and washer.
Disconnect the front shock absorber with coil spring from the suspension lower arm.
48069
7.REMOVE FRONT NO. 1 SUSPENSION LOWER ARM SUB-ASSEMBLY LH
Remove the 2 bolts and disconnect the front lower ball joint attachment LH from the front axle.
Place matchmarks on the No. 2 camber adjust cam and toe adjust cam sub-assembly.
| *a | Matchmark |
Remove the nut, No. 2 camber adjust cam, camber adjust cam assembly, bolt, toe adjust cam sub-assembly, No. 2 toe adjust plate and front No. 1 suspension lower arm sub-assembly LH.
Remove the cotter pin and nut.
Using SST, remove the front lower ball joint attachment LH.